Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Passat
    4. : How to disassemble the turbocharger on the Volkswagen Passat 2.0 TDI

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Turbine
Operation: How to disassemble the turbocharger on the Volkswagen Passat 2.0 TDI

Let's see in this video how to remove and replace the turbocharger on the Volkswagen Passat B6 2.0 TDI. First of all we open the bonnet of our car and start by removing the air conveyor and the filter box; to do this, unscrew the fixing screws and disconnect the suction sleeve, as shown in the video. At this point we disconnect the electrical wiring that we find above the engine and remove the aluminum bulkhead that surrounds the hot parts and the turbine; we unscrew the screws of the exhaust manifolds to remove the whole apparatus, following the video to the end!


Posted on 29 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Passat 2005-2010 - How much does it cost to replace the turbine of a Volkswagen Passat? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos