Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Wishbone on a Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Control arm

In this video tutorial, you will see the steps necessary to disassemble and replace the wishbone on a Volkswagen Golf 4, following these simple steps. First, lift the vehicle and unscrew the fastening bolts of the wishbone using a 13 mm socket spanner; then unscrew the side bolts with an 18 mm spanner, as illustrated in the video. At this point, disconnect the wishbone from the ball joint, remove it, and replace it with the new one; then reassemble the new part, applying the reverse procedure of disassembly!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) If the rubber damper of the wishbone suspension has failed, it is often possible to purchase just the bush from the aftermarket rather than the entir…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The front suspension wishbone consists of two elements: the triangular-shaped wishbone itself, which has two silent blocks for attachment to the chas…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) When the bushes (silent blocks) of the front suspension wishbone fail, the ride over uneven surfaces becomes particularly noisy, not to mention the l…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos