Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Volkswagen Passat B6

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Service warning light

See other generations:
Video tutorial

In this video, you will see the necessary procedure to reset the service light for the regular oil change maintenance on the Volkswagen Passat B6 in simple steps. First, get in the car and turn on the ignition; then press and hold the key button located on the instrument panel, subsequently pressing the minute button on the left: wait a few seconds before turning off the ignition.

Finally, insert the key and turn on the ignition again to check the result!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volkswagen Passat
How to Reset the Service Light on a Volkswagen Passat
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) In this short video, we will see how to reset the service light on a Volkswagen Passat, which should be done every time you perform a service yoursel…
How to Reset the Service Light on a Volkswagen Passat
How to Reset the Service Light on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Today, we will look at the instructions that will allow us to reset the service light for the regular maintenance oil change on a Volkswagen Passat. …
Service Reset on a Volkswagen Passat B8
Service Reset on a Volkswagen Passat B8
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) In this brief tutorial video, you will see how to reset the service light on a Volkswagen Passat, B8 model produced from 2014 to 2023. Start the proc…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos