Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Caddy
  6. : Replacing the drive shaft boot on the Volkswagen Caddy 3

Volkswagen Caddy - Video tutorial

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: Drive shaft boot
Operation: Replacing the drive shaft boot on the Volkswagen Caddy 3

Let's find out in this video how to remove and replace the front axle shaft boot on the third series Volkswagen Caddy, following the instructions below. First we lift the car and remove the front wheel; then we go to disconnect the swinging arm, unscrewing the fixing pin. At this point we remove the drive shaft from the braking system and extract the old rubber boot; let's clean the affected area well and then make the replacement. We just have to reassemble the new drive shaft boot, applying the reverse procedure!


Posted on 8 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos