Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Air Conditioning Fan from the Volkswagen Polo 5

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Blower motor

See other generations:
Video tutorial

In this tutorial video, learn how to remove and replace the air conditioning fan on the Volkswagen Polo 6R, fifth series, by following these simple steps. First, get inside the vehicle and start by removing the passenger side glove compartment; to do this, unscrew the mounting screws found inside, at the top and on the sides, as shown in the video.

Next, remove the glove compartment to begin disassembling the fan; unscrew its screws with a socket spanner and disconnect the power connector. Then, replace the fan with the new one!


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor on a Volkswagen Polo
How to Replace the Cabin Fan Resistor on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Follow these instructions to remove and replace the cabin fan resistor on your Volkswagen Polo. First, get into the vehicle on the front passenger si…
Air Fan Replacement for VW Polo
Air Fan Replacement for VW Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Remove the air conditioning fan from a VW Polo if it is no longer functioning. Start by removing the glove compartment located in the front dashboard…
How to Replace the Cabin Fan Resistor in the Volkswagen Polo
How to Replace the Cabin Fan Resistor in the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Follow these steps to disassemble and replace the cabin fan resistor in the Volkswagen Polo. First, get inside the vehicle and start by removing the …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos