Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Air fan replacement on Vw Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Interior blower
Operation: Air fan replacement on Vw Polo

We disassemble the air conditioning fan on the Vw polo if it no longer works. We need to remove the glove box located in the front dashboard. We open the glove box and unscrew all the screws on the sides of the drawer, rotate the glove box forward, remove the plate placed as a cap and remove the air filter from the housing. Once this is done, let's unscrew the air fan and then disconnect the power supply. We assemble the new air fan, filter and glove box drawer removed earlier. We turn on the knobs and check the operation.


Posted on 2 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2009-2017 - Why is the Volkswagen Polo's cabin fan not working? Read Answer
    • Polo 2009-2017 - Where is the cabin fan resistor located in the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - Why isn't the fan of the Volkswagen Polo 5 working? Read Answer
    • Polo 2009-2017 - Why does the interior blower no longer work in the Volkswagen Polo? Read Answer
    • Polo 2001-2009 - Why is the fan of the Volkswagen Polo 4 not working? Read Answer
    • Polo 2017-2025 - What to do if the Volkswagen Polo fan does not work? Read Answer
    • Polo 2001-2009 - Why does the ventilation of the Polo 4 only work on level 4? Read Answer
    • Polo 2009-2017 - How to replace the interior blower fuse in a Volkswagen Polo tdi? Read Answer
    • Polo 2001-2009 - Where is the resistor of the passenger compartment fan of the 2007 VW Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos