|
Do it yourself
| |||
| ||||
How to Remove and Replace the Heating Radiator of the Golf 4
Model: Volkswagen Golf
Golf 6, MK 6, 5K1, Golf VI
- Years:
2008, 2009, 2010, 2011, 2012
Video tutorial
The heating radiator is one of the most delicate components of your car, and it often needs replacing. Its housing is not the easiest to access, but with a bit of patience, you can complete the task effectively. Follow these steps. Ensure the car is turned off for the entire procedure. Unlock the front bonnet and lift it fully. Then, reach the driver's side and place a torch to get good visibility of the pedal area. Remove the mat and unscrew the screws holding the plastic cover in place. Once all the plastic parts are removed, you will have direct access to the components. The heating radiator is located on the left side. Remove the metal piece securing it and finally pull the radiator towards you to detach it. Replace it with a new model and reassemble all the previously removed parts.
Updated on 4 May 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(2012-2019 /
MK 7, Golf 7, Golf VII)
Today we will see the main instructions that will allow us to disassemble and replace the heater radiator of the Volkswagen Golf's cabin. First, we g…
Volkswagen Golf
(2012-2019 /
MK 7, Golf 7, Golf VII)
The procedure for replacing the cabin heater radiator in the Volkswagen Golf requires completely removing the dashboard to access the components insi…
Volkswagen Golf
(1997-2003 /
Golf IV, Golf 4, MK 4)
In this video, you will see the procedure to remove and replace the cabin heating radiator of the fourth series Volkswagen Golf. First, get inside th…
Other guides you may be interested in
|
How to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
