Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs on a Volkswagen Golf?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the dipped beam bulbs on the Volkswagen Golf MK7 is a very simple and quick operation; let's see how to proceed in this tutorial. After obtaining the correct replacement bulbs, open the bonnet and locate the two large caps at the back of the headlamp.

For the dipped beam light, you need to open the cap on the outer side. Once done, disconnect the connector and remove the lamp holder by turning it approximately 45 degrees clockwise.

At this point, replace the bulb and reassemble everything by following the reverse procedure.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the Dipped Beam Bulbs in a Volkswagen Golf?
How to Replace the Dipped Beam Bulbs in a Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Replacing the dipped beam bulbs in the Volkswagen Golf 6 is a straightforward and quick task. First, ensure the key is not in the ignition. Then, unl…
Replacing the Dipped Beam Bulb on Volkswagen Golf 7
Replacing the Dipped Beam Bulb on Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Replacing the dipped beam bulb on a Volkswagen Golf 7 is really straightforward, and we will show you how. Lift the bonnet securely. Access the rear …
Replacing the Dipped Beam Bulb in the Front Headlamp of a Volkswagen Golf
Replacing the Dipped Beam Bulb in the Front Headlamp of a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In a few simple steps, see how to replace the dipped beam bulb in the front headlamp of a Volkswagen Golf. First, open the bonnet of the vehicle and …

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos