Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volkswagen Polo?

Model: Volkswagen Polo MK 6, Polo 6, AW1, MK VI, Polo VI - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

On the Volkswagen Polo, after completing all required maintenance tasks such as an oil change, you need to manually reset the corresponding warning. This tutorial shows you how to proceed.

First, insert the key and leave it in the initial position, then press and hold the left button located in the centre of the dashboard while simultaneously turning on the instrument panel. Once the confirmation message appears on the display, release the button and complete the operation by pressing the right button indicating "0.0/SET".


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you can start, sit in the driver's seat of your Volkswagen Polo and close all the doors. Begin by pressing and holding the "0.0/SET" button lo…
How to Reset the Engine Oil Light on a Volkswagen Polo
How to Reset the Engine Oil Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) This guide shows you how to reset the service light for the engine oil change on a Volkswagen Polo. First, get in the car and turn on the ignition; t…
How to reset the service of the Volkswagen Polo
How to reset the service of the Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) After replacing the engine oil and oil filter, it is necessary to reset the service light; let's see how to perform the procedure on the Volkswagen P…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos