Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Half Shaft Boot Clips

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Axle shaft

See other generations:
Video tutorial

It may happen that the clips securing the half shaft boots break, leading to grease leakage and noise from the joint itself; for this reason, it is important to use metal clips rather than plastic ones. If the boot is perfectly intact, before applying the new securing clip, it is advisable to insert grease inside the boot (using a syringe grease gun) and finally secure the boot with a metal clip of appropriate diameter; it is clear that, for a temporary repair, a plastic clip may also suffice.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The diesel filter is located at the front left of the engine bay (when viewed from the front), near the coolant reservoir. Using pliers, loosen the h…
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Here is the video guide to understand where to intervene and what to do to change the intake manifold gaskets. As shown in the images, take the compl…
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the driveshaft boot, you need to remove the driveshaft to slide off the old boot and fit the new one. There is a product available called …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos