Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Driveshaft Boot

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Control arm

See other generations:
Video tutorial

To replace the driveshaft boot, you need to remove the driveshaft to slide off the old boot and fit the new one. There is a product available called EASY BOOT that allows installation without removing the driveshaft; it is an open boot along the axis that, after being fitted onto the driveshaft, can be sealed using the provided adhesive.

For the classic repair, lift the vehicle on a jack, remove the wheel, the brake caliper, and the driveshaft nut (tap the shaft before removing the nut), the suspension arm ball joint, slide out the driveshaft, and disconnect the CV joint.

At this point, proceed with the boot replacement by removing the clips; insert the new boot, fill the joint with clean grease, and secure the boot with the appropriate clips. Reverse the steps for reassembly.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.8T
Guide to Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.8T
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today's guide will show you the main steps on how to remove and replace the water pump and timing belt on the Volkswagen Golf 1.8T. For simplicity an…
Guide to replacing the timing belt of the Volkswagen Golf 1.4 TSI
Guide to replacing the timing belt of the Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide, we will see the main instructions on how to disassemble and replace the timing belt on the Volkswagen Golf 1.4 TSI. First of all, we o…
Guide to Replacing the Brake Booster on the Volkswagen Golf
Guide to Replacing the Brake Booster on the Volkswagen Golf
Volkswagen Golf (1983-1992 / Golf 2, MK 2) This guide outlines the main steps to remove and replace the master cylinder and brake booster on the Volkswagen Golf. First, open the bonnet of your…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos