Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

If you need to dismantle the remote key to replace the battery or the covers, note that there are two models. MODEL WITH SEPARABLE KEY AND REMOTE To dismantle this first model, first remove the logo from the back of the cover and unscrew the underlying screw; at this point, you can separate the remote part from the key. To open the remote shells, simply lever in the gap between the two shells and then remove the battery and the electronic circuit.

Similarly, lever between the shells of the part connected to the key to separate them: take care with the preload spring of the key opening mechanism; also, inside this shell is the transponder capsule of the immobiliser. MODEL WITH NON-SEPARABLE KEY AND REMOTE To separate the shells of this model, first unclip the battery cover, then, using a punch, press inside the designated hole on the pin to retract it and separate the two shells.

In this case, the transponder is integrated into the electronic circuit.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Inside the remote key, besides housing the battery and the electronic circuit for opening and closing the vehicle, is the so-called transponder: an a…
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) The following steps will guide you through removing and replacing the battery in the remote key of the Volkswagen Golf. First, take your remote contr…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Is the remote key battery of the Golf flat and you don’t know how to open the car? Here’s what to do. Take your remote and press the button to releas…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos