Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Internal Temperature Sensor of the Volkswagen Golf 5

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the sensor that measures the internal temperature of the Volkswagen Golf 5, remove the panel located on the left side of the dashboard, accessible only by opening the driver's door. The sensor will be behind this panel, just above the fuse box; it needs to be removed by sliding it out of its housing and disconnecting it from the relevant connector.

This way, you can insert the new replacement part and connect it to the relevant cable; finally, close everything with the panel, ensuring the part is functioning.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Removing the Coolant Temperature Sensor from the Volkswagen Golf 1.6
Removing the Coolant Temperature Sensor from the Volkswagen Golf 1.6
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this guide, you will see the main instructions on how to remove and replace the coolant temperature sensor from the engine of the Volkswagen Golf …
How to Replace the Internal Temperature Sensor of the Volkswagen Golf 7
How to Replace the Internal Temperature Sensor of the Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To replace the internal temperature sensor of the Volkswagen Golf 7, remove the panel on the left side of the dashboard to access the components unde…
How to Change the Outside Temperature Sensor of the Volkswagen Golf 5
How to Change the Outside Temperature Sensor of the Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, in this video tutorial, learn how to remove and replace the outside temperature sensor of the fifth series Volkswagen Golf in simple steps. Fi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos