Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light from a Volkswagen Tiguan 2

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tail light

See other generations:
Video tutorial

If for various reasons you want to remove one of the rear lights (or both) from your Volkswagen Tiguan Mk2, this guide is all you need. Just follow the instructions carefully to complete the entire operation without any issues.

First, switch off the car and park it safely. Then, go to the rear of the car and lift the boot.

At this point, remove the protective cover located over the light (you can use a flat screwdriver to assist). Disconnect the electrical connector and move back outside.

Now, simply pull the light towards you and remove it completely.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of a Volkswagen Tiguan
How to Remove the Rear Light of a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) To remove the rear light of a Volkswagen Tiguan, open the bonnet to access the interior of the boot. Corresponding to the light you want to remove, y…
How to Replace the Rear Light of the Volkswagen Tiguan
How to Replace the Rear Light of the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this guide, follow the instructions to remove and replace the rear light and its bulbs on the Volkswagen Tiguan. First, open the boot and start un…
How to Remove the Rear Light on a Volkswagen Tiguan?
How to Remove the Rear Light on a Volkswagen Tiguan?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) To remove the rear light on a Volkswagen Tiguan, open the tailgate to access the side protection panel next to the light. Once this panel is removed,…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos