Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light in the Volkswagen Golf?

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Service warning light

See other generations:
Video tutorial

In this video, you can see how to turn off the oil change light in the Volkswagen Golf MK3. This procedure should only be followed after performing the oil change, a task to be entrusted to a specialised workshop. Start by pressing the button located under the speedometer, while simultaneously turning on the ignition and turning it off after about 10 seconds.

At this point, release the button and press it quickly a second time; a message will appear on the display indicating the type of maintenance required, "OEL" refers to the oil. Hold down the button next to the fuel gauge until 3 dashes appear in place of the "OEL" message.

Finally, turn off and turn on the instrument cluster.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on the Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) After completing a service, it is necessary to reset the oil service light. This brief video tutorial will explain how to reset the oil warning light…
How to Reset the Service Light and Inspection Light on a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) This short video shows you how to reset the service light and inspection light on a Volkswagen Golf 7 after performing the usual service. Resetting t…
Reset the Engine Oil Service Light on the Volkswagen Golf
Reset the Engine Oil Service Light on the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this tutorial, you will learn how to reset the engine oil service light on the Volkswagen Golf by following these simple steps. First, get in the …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos