Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlamp Bulb

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Headlight bulb

See other generations:
Video tutorial

To access the rear of the headlamp and replace the bulb, first remove the air intake duct. Next, remove the rubber cover, disconnect the power connector, and unclip the bulb retaining spring.

Insert the new bulb (H7 model) without touching the glass with your fingers, seat it in its housing, secure it with the springs, reconnect the power connector, and then refit the rubber cap and the air duct. If you notice a difference in brightness between the two headlamps after switching them on, it is advisable to replace the other bulb as well.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacing Front Headlamp Bulbs
Replacing Front Headlamp Bulbs
Volkswagen Passat (2005-2010 / B6, 3C) To replace the front headlamp bulb, you do not need to remove anything as there is enough space behind the headlamp to work; therefore, disconnect th…
Replacement of the daytime running light bulb of the Volkswagen Passat front headlight
Replacement of the daytime running light bulb of the Volkswagen Passat front headlight
Volkswagen Passat (2010-2014 / B7) Following these simple steps, we will see how to disassemble and replace the daytime running light bulb of the front headlight of the Volkswagen Pass…
Replacing the Front Headlight Bulb on Volkswagen Passat B6 3C
Replacing the Front Headlight Bulb on Volkswagen Passat B6 3C
Volkswagen Passat (2005-2010 / B6, 3C) In this video tutorial, you will learn how to remove and replace the front headlight bulb on a Volkswagen Passat B6 3C by following these simple inst…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos