|
Do it yourself
| |||
| ||||
Adding AdBlue Additive to TDI Clean Diesel System
Model: Volkswagen Touareg
7L, MK 1
- Years:
2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
In vehicles equipped with the TDI clean diesel system, a urea-based solution (AdBlue®) is injected into the exhaust system, upstream of a special catalyst, which allows for a reduction in nitrogen oxide emissions. AdBlue is contained in a dedicated tank located in the boot beneath the spare wheel well. Generally, this tank is filled during servicing, as under normal driving conditions, the AdBlue supply is sufficient to cover the mileage between services: for this reason, it is absolutely necessary to adhere to maintenance schedules. The consumption of AdBlue is around 0.5-1% of diesel fuel consumption. The AdBlue tank holds approximately 23 litres. If the AdBlue consumption proves to be higher due to a particular driving style, you must top it up independently, even between services. Open the rear bonnet, lift the support panel, remove the spare wheel, and take off the AdBlue tank cap; insert the appropriate bottle with a dispenser and screw it in; press to dispense the additive and check the tank level using the diagnostic equipment.
Updated on 12 February 2026 by ScegliAuto
Related tutorials
Volkswagen Touareg
(2018-2026 /
CR, MK 3)
When the Adblue warning light comes on in this model of vehicle from the German manufacturer, the onboard computer indicates that it is necessary to …
Volkswagen Touareg
(2010-2018 /
MK 2, 7P)
To reset the AdBlue warning light on the Volkswagen Touareg, open the rear hatch and remove the carpet at the base of the boot. Once the carpet is re…
Volkswagen Touareg
(2002-2010 /
7L, MK 1)
To resolve issues of gearbox sticking when hot, it is advisable to change the oil and treat the transmission with specific cleaning additives. Having…
Other guides you may be interested in
|
How to open the bonnet on a Volkswagen Golf?
In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |