Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Expansion Tank on a Volkswagen Golf Mk3

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997

See other generations:
Video tutorial

This brief and simple guide outlines the procedure to remove and replace the coolant expansion tank on a Volkswagen Golf Mk3. First, disconnect the coolant hose to drain the fluid into a container; then open the bonnet and disconnect the electrical connector and hoses attached to the expansion tank, subsequently unscrewing the fixing screws found on the sides with a socket spanner, as shown in the video.

At this point, remove and replace the expansion tank with a new one!


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Remove the Coolant Reservoir on a Volkswagen Golf
How to Remove the Coolant Reservoir on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To remove and install the coolant reservoir on a Volkswagen Golf, follow this procedure: open the car door and pull up the bonnet release lever locat…
How to replace the coolant in a Volkswagen Golf 7?
How to replace the coolant in a Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To replace the coolant in a Volkswagen Golf 7, open the bonnet to remove the cap from the coolant reservoir. Once the reservoir is open, lift the car…
Replacing the Radiator Coolant Reservoir on the Volkswagen Golf 4 GTI
Replacing the Radiator Coolant Reservoir on the Volkswagen Golf 4 GTI
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In today's tutorial, you will learn how to replace the coolant reservoir on the fourth generation Volkswagen Golf GTI. First, open the bonnet and sta…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos