Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant in a Volkswagen Golf 7?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Antifreeze coolant

To replace the coolant in a Volkswagen Golf 7, open the bonnet to remove the cap from the coolant reservoir. Once the reservoir is open, lift the car with a jack and remove the screws securing the lower panel of the engine bay. After removing the panel, disconnect the hose connected to the radiator, allowing the coolant to flow into a suitably positioned container. When the coolant has completely drained, refit the lower panel and top up with new coolant.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Coolant on Volkswagen Golf Mk4
Replacing Coolant on Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today, in this video tutorial, you will see how to replace the coolant on a Volkswagen Golf fourth series. First, remove the old coolant from the rad…
When to change the timing belt on a Volkswagen Golf 7 2.0 TDI
When to change the timing belt on a Volkswagen Golf 7 2.0 TDI
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The timing belt of a seventh generation Volkswagen Golf, model produced from 2012 to 2019, with a 2.0 TDI Diesel engine, according to the manual, sho…
How to Replace the Coolant and Hose on a Volkswagen Golf 5
How to Replace the Coolant and Hose on a Volkswagen Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today, we will see how to remove the lower coolant hose and replace the antifreeze on a Volkswagen Golf Mk5. First, lift the vehicle and locate the a…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos