Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Coolant Hose on a Volkswagen Golf 2.0 FSI

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

In this brief guide, you will find the main instructions to remove and replace the coolant hose of the radiator on a Volkswagen Golf 2.0 FSI. First, open the bonnet of the vehicle and start disconnecting the antifreeze hose located next to the alternator, allowing the fluid to drain into a container for about ten minutes; then, raise the vehicle and disconnect the radiator hose connected to the thermostat, as shown in the video.

Replace and install the new component by applying the reverse procedure!


Updated on 6 October 2026 by ScegliAuto


Related tutorials

Replacing the Thermostat on the Volkswagen Golf
Replacing the Thermostat on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this guide, discover the procedure to remove and replace the thermostat on the Volkswagen Golf. First, open the bonnet and start by removing the c…
Guide to Replacing the Thermostat on a Volkswagen Golf 1.6
Guide to Replacing the Thermostat on a Volkswagen Golf 1.6
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today's steps will show you how to remove and replace the thermostat on a Volkswagen Golf 1.6 16V, following the instructions below. First, open the …
How to Replace the Coolant on a Volkswagen Golf MK6 2.0 TSI
How to Replace the Coolant on a Volkswagen Golf MK6 2.0 TSI
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this guide, we will cover the steps to replace the coolant on a sixth-generation Volkswagen Golf with a 2.0 TSI engine. First, lift the vehicle an…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos