Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Tighten the Handbrake on a Volkswagen Polo Mk5

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Parking brake

See other generations:
Video tutorial

The Volkswagen Polo Mk5 presented by our YouTuber has several issues that he will want to resolve over time, but let's look at the reason for the video: tightening the handbrake. First, remove the plastic cover that conceals the handbrake tension cables.

This is very simple as it is held in place by clips, so just lever it off. By operating the handbrake, you can see the mechanism in action. Using a 10 mm spanner, tighten the screw to your desired tension.

Check by pulling the handbrake to see the result achieved. When you are satisfied with the result, refit the plastic cover and the handbrake will be adjusted.

Simple and quick.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on a Volkswagen Polo?
How to Adjust the Handbrake on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To adjust the handbrake on the Volkswagen Polo, use a tool to pry off the cover of the storage compartment located in front of the handbrake. Once th…
How to Adjust the Handbrake on Volkswagen Polo
How to Adjust the Handbrake on Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) These brief and simple steps will show you how to adjust the handbrake on a Volkswagen Polo. First, get inside the cabin and start by removing the pl…
How to Adjust the Handbrake on the Volkswagen Polo
How to Adjust the Handbrake on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Today, you will learn the steps to adjust the handbrake on the Volkswagen Polo. Before adjusting the handbrake, check the wear condition of the rear …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos