Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the ABS Sensor on a Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Brake system

In this video tutorial, you will see how to replace the ABS sensor on a Volkswagen Golf by following these essential steps: First, loosen the bolts on the front wheel; next, lift the vehicle with a hydraulic jack and place safety stands under the car; completely unscrew the bolts and remove the wheel from its hub; unscrew the ABS sensor mounting elements; disconnect the ABS speed sensor connector; connect the ABS sensor wiring, mount the ABS sensor onto the hub and secure it; finally, screw the wheel bolts back in.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Before starting, open the bonnet of your Volkswagen Golf. Begin by disconnecting the relevant electrical connector. Next, using pliers, unclip and re…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The oil level sensor allows you to check the amount of oil in the tank via the vehicle's onboard computer. The sensor on the Volkswagen Golf model 6 …
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To replace the fuel level sensor on the Volkswagen Golf, loosen the screws securing the rear seat bench to remove it. After removing the bench, locat…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos