Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil Pressure Sensor on the Volkswagen Golf 1.4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003

See other generations:
Video tutorial

Briefly follow the instructions to remove and replace the engine oil pressure sensor on the Volkswagen Golf 1.4. First, open the bonnet and locate the pressure sensor, situated at the bottom of the engine block; then disconnect its electrical connector and unscrew the sensor to remove it, as shown in the video.

At this point, drain the engine oil into a container, then install the new oil pressure sensor; reconnect the electrical connection and finally pour in the suitable new engine oil!


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to replace the oil pressure sensor of the Volkswagen Golf GTI
How to replace the oil pressure sensor of the Volkswagen Golf GTI
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this guide, we will see the main instructions on how to disassemble and replace the oil pressure sensor of the Volkswagen Golf GTI engine. First, …
Where is the Oil Pressure Sensor Located on the Volkswagen Golf?
Where is the Oil Pressure Sensor Located on the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video, see where the oil pressure sensor is located on the Volkswagen Golf and how to proceed if you need to replace it, a very simple task. …
Replacing the Engine Oil Level Sensor on a Volkswagen Golf
Replacing the Engine Oil Level Sensor on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this brief guide, you will learn how to remove and replace the engine oil level sensor on a Volkswagen Golf. First, place the motorcycle on a stan…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos