Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Oil Level Sensor on a Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

In this brief guide, you will learn how to remove and replace the engine oil level sensor on a Volkswagen Golf. First, place the motorcycle on a stand and begin to unscrew the oil drain bolt located under the engine, allowing the oil to drain into a container; then disconnect the three securing screws of the oil level sensor using a Torx key, disconnecting the electrical connector to remove it. At this point, install the new engine oil level sensor, securing it properly and connecting it; pour in the new engine oil!


Posted on 9 June 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil Pressure Sensor on the Volkswagen Golf 1.4
How to Replace the Engine Oil Pressure Sensor on the Volkswagen Golf 1.4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Briefly follow the instructions to remove and replace the engine oil pressure sensor on the Volkswagen Golf 1.4. First, open the bonnet and locate th…
Where is the Oil Level Sensor on the Volkswagen Golf 6?
Where is the Oil Level Sensor on the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) The oil level sensor allows you to check the amount of oil in the tank via the vehicle's onboard computer. The sensor on the Volkswagen Golf model 6 …
How to Top Up the Engine Oil of the Volkswagen Golf 2.0
How to Top Up the Engine Oil of the Volkswagen Golf 2.0
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video tutorial, you will learn how to top up or add engine oil to the Volkswagen Golf by following these simple and quick steps. First, open …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos