Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Engine Oil of the Volkswagen Golf 2.0

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

In this video tutorial, you will learn how to top up or add engine oil to the Volkswagen Golf by following these simple and quick steps. First, open the bonnet by pulling the lever inside; then pull the dipstick located on the engine cover, as shown in the video.

At this point, check the oil level indicated by the position of the oil on the markings; if the oil level is at the minimum mark, add engine oil to reach the next service interval.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

Replacing the Engine Oil Level Sensor on a Volkswagen Golf
Replacing the Engine Oil Level Sensor on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this brief guide, you will learn how to remove and replace the engine oil level sensor on a Volkswagen Golf. First, place the motorcycle on a stan…
How to Change the Engine Oil on the Volkswagen Golf?
How to Change the Engine Oil on the Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To change the engine oil on the Volkswagen Golf, lift the car so you can loosen the drain plug of the oil reservoir. Once this plug is removed, colle…
How to Replace the Engine Oil Sensor Tube on a Volkswagen Golf 1.6
How to Replace the Engine Oil Sensor Tube on a Volkswagen Golf 1.6
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this guide, we will see the main instructions on how to remove and replace the engine oil sensor tube on a Volkswagen Golf 1.6. First, open the bo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos