Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil Sensor Tube on a Volkswagen Golf 1.6

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

In this guide, we will see the main instructions on how to remove and replace the engine oil sensor tube on a Volkswagen Golf 1.6. First, open the bonnet of the vehicle and start removing the engine oil sensor tube; to do this, detach it from the base, removing any piece left inside the metal tube, as shown in the video.

At this point, install the new original replacement, securing it properly to the tube; finally, insert the dipstick and ensure it is well secured, allowing you to check the engine oil level.


Posted on 6 April 2026 by ScegliAuto


Related tutorials

Replacing Lambda Sensor on Golf 4 Variant
Replacing Lambda Sensor on Golf 4 Variant
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Want to replace the Lambda sensor on a Golf 4 Variant? Let's see how to remove the working sensor. Lift the vehicle with a column lift, locate the se…
Replacing the lambda sensor on the Volkswagen Golf
Replacing the lambda sensor on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) This guide shows how to remove and replace the lambda sensor on the Volkswagen Golf. First, lift the vehicle and start by removing the cover from the…
Replace Lambda Sensor on Volkswagen Golf Mk4
Replace Lambda Sensor on Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video tutorial, you will learn how to replace the lambda sensor on the Volkswagen Golf fourth generation. First, disconnect the battery. Then…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos