Do it yourself
| ||||
|
Volkswagen Golf - Video tutorial
Model: Volkswagen Golf
Golf IV, MK 4, Golf 4
- Years 1997-2003 Do we want to replace the Lambda probe from a Golf 4 Variant? Let's see how the operating probe is disassembled. We lift the vehicle with the column bridge, we identify the probe placed above the muffler pipe. We disconnect the lambda probe clamp, unscrew it with a special socket wrench for Lambda. Once the probe has been removed from its housing, let's compare it with the new piece. We assemble the probe with a special key and screw it, reconnect the power plug. We test the functioning of the new Lambda probe once assembly is complete: we start the engine of the Golf Variant.
Posted on 19 January 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |