Do it yourself
Frequently asked questions about cars and motorcycles

Where is the oil pressure sensor located in the Volkswagen Golf?

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

In this video we can see where the oil pressure sensor is located in the Volkswagen Golf and how to proceed in case we need to replace it, a very simple operation. As shown, the sensor in question is located in the front left area of the engine, to our right when looking at the vehicle from the front. Before disassembling it, make sure the engine is completely cold, then extract the oil dipstick and remove the plastic cover. Disconnect the connector, unscrew the sensor with a 24mm socket wrench and install the replacement.

Posted on 1 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Let's briefly see the instructions necessary to disassemble and replace the oil pressure sensor of the Volkswagen Golf 1.4. First of all, we open the…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The oil level sensor allows you to check the amount of oil in the tank via the vehicle's onboard computer. The sensor on the Volkswagen Golf model 6 …
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) In this guide, we will see the main instructions on how to disassemble and replace the oil pressure sensor of the Volkswagen Golf GTI engine. First, …

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos