Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Engine Oil Temperature Sensor on the Volkswagen Golf?

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

To replace the engine oil temperature sensor on the Volkswagen Golf, access the underside of the car, specifically in the area where the oil drain plug is located. Unscrew the drain plug, allowing all the used oil to flow into a suitably positioned container; once the oil has completely drained, unscrew the screws securing the oil temperature sensor next to it, after disconnecting the connector. Once removed, connect the new sensor, secure it, and add the new oil.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this guide, you will see the main instructions on how to remove and replace the coolant temperature sensor from the engine of the Volkswagen Golf …
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Briefly follow these instructions to remove and replace the coolant temperature sensor on a Volkswagen Golf 1.8 GTI. First, open the bonnet of the ve…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Below we will see the instructions that will allow us to disassemble and replace the ambient temperature sensor of the Volkswagen Golf. First of all,…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos