Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on Volkswagen Golf 6

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Tire pressure warning light

See other generations:
Video tutorial

This video tutorial shows how to reset the tyre pressure light on a Volkswagen Golf 6, produced from 2008 to 2012. Before performing this operation, check the correct pressure of all four tyres as specified by the manufacturer. First, turn on the vehicle's instrument panel.

The reset button is located inside the glove compartment, as shown in the video. Press and hold the reset button for a few seconds until the pressure light disappears from the speedometer.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Volkswagen Golf
How to Reset the Tyre Pressure Warning Light on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Let's discover the necessary information on how to reset the tyre pressure warning light (TPMS) on the Volkswagen Golf; before performing the reset, …
How to Reset the Tyre Pressure Warning Light on the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Resetting the tyre pressure warning light (TPMS) is very simple; here’s how to do it on the Volkswagen Golf. Before resetting, ensure all four tyres …
How to Reset the Tyre Pressure Light on a Volkswagen Golf
How to Reset the Tyre Pressure Light on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this tutorial, you will see how to reset the tyre pressure light on a Volkswagen Golf by following a few simple steps that will allow you to manag…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos