Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob Gaiter on a Volkswagen Passat?

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Shifter boot

To replace the gear knob gaiter on a Volkswagen Passat, open the glove compartment located in front of the gear lever to detach the lower part at the base of the gaiter. Then, the gaiter can be fully lifted by removing the clip that secures the knob to the end of the lever; once this is detached, you can completely remove the gaiter and the corresponding gear knob. This way, you can position the new one by securing the clip and the clips at the base.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Gear Knob and Gaiter of the Volkswagen Passat
Replacing the Gear Knob and Gaiter of the Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) In today’s video tutorial, you will see the steps to disassemble and replace the gear knob and gaiter of the Volkswagen Passat. First, get inside the…
Replacement of the gear shift knob and boot of the Volkswagen Passat B6
Replacement of the gear shift knob and boot of the Volkswagen Passat B6
Volkswagen Passat (2005-2010 / B6, 3C) Over time and with intense use, the gear shift boot and its knob can wear out and become unsightly, so it is better to replace them with original par…
Replace the Gear Knob on Your Volkswagen Passat
Replace the Gear Knob on Your Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Want to replace the gear knob on your Volkswagen Passat? Here’s how to do it: Use a plastic trim tool to detach the leather gaiter trim, then grasp t…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos