Do it yourself
| ||||
|
Volkswagen Tiguan - Video tutorial
Model: Volkswagen Tiguan
MK 2, BW, AD
- Years 2016-2024 To be able to deactivate the Start&Stop of the Volkswagen Tiguan, a diagnostic tool must be inserted into the vehicle's OBD port: this port will be found at the bottom with respect to the steering column. Once the device has been connected, you will need to access the scanner menu. Here it will be necessary to select the vehicle in question and also its version: in this way it will be possible to select the Start&Stop item so that this can be deactivated. Once this is done, you will be able to unplug the scanner, making sure your system is disabled.
Posted on 17 December 2022 by ScegliAuto
|
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |