Do it yourself
Frequently asked questions about cars and motorcycles

Where are the fuses in the Volkswagen Polo 5?

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Fuse box

In the Volkswagen Polo 5, produced between 2009 and 2017, the fuses are distributed between the passenger compartment and the engine bay. However, they are not scattered but collected within two fuse boxes, the layout of which is shown both in this video and in the owner's manual for the Volkswagen Polo 5, as well as on the inside of the fuse box covers. The video also shows the exact location of the two fuse boxes: the first, for the passenger compartment, is located beneath the steering column, under the relevant plastics, while the second, for the engine bay, is positioned next to the battery.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) The attached video shows the fuse diagram for a Volkswagen Polo. To access the fuses, open the front door. Next, unclip and remove the side cover of …
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) All the fuses in the Volkswagen Polo are located within specific fuse boxes installed in the vehicle. In this model, you can find two boxes for the f…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) The fuses in the Volkswagen Polo are divided between two fuse boxes installed in the vehicle: the first is located inside the dashboard, in the centr…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2017-2025 - What is the location of the power steering fuse on the Volkswagen Polo? Read answer
    • Polo 2009-2017 - Where is the wiper fuse located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Where is the Volkswagen Polo wiper relay located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos