Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Latest Generation LED Bulbs in a Volkswagen Golf

Model: Volkswagen Golf Golf 8, MK 8, Golf Viii - Years 2019-2026
Part: Headlight bulb

In this video tutorial, you can see how to install the latest generation LED bulbs in a Volkswagen Golf by following a few simple steps: first, purchase the latest generation LED bulbs. Get into the vehicle, turn off the engine, and pull the handbrake. Lift the bonnet and secure it with the appropriate prop. Start with the left headlamp, which may be more challenging for beginners due to limited space. Without removing the headlamp, reach in and turn the closure cap (an eighth of a turn) to remove it. Check the cap seal and replace it if necessary. Remove the halogen H7 bulb, then pull to detach it from the bracket; replace the old bulb with the latest generation LED bulb (ensure the LED bulb is correctly fitted in the bracket with the correct polarity, otherwise it won't light up). Reassemble everything in reverse order. Repeat the same process on the other side.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The bulbs for the Volkswagen Golf 7 shown in the video are supplied by a specific site for LED bulb kits. The bulbs used for the dipped headlights on…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Replacing the bulbs of the number plate lights with LED type will give the vehicle a much more modern and appealing look, as well as significantly im…
Volkswagen Golf (1983-1992 / MK 2, Golf 2) Today we will explain how to install LED lights on the dashboard of the Volkswagen Golf MK 2 model. Before performing this operation, it will be nece…

    Frequently Asked Questions

    • Golf 2003-2008 - How to remove the headlight bulb of a Volkswagen Golf? Read answer

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos