Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Lights in a Volkswagen Passat

Model: Volkswagen Passat B7 - Years: 2010, 2011, 2012, 2013, 2014
Part: Interior dome light bulb

See other generations:
Video tutorial

In today's video, you will see how to replace the central interior lights in a Volkswagen Passat. This operation helps rejuvenate the interior of your vehicle and makes it brighter.

To proceed, gather a crosshead screwdriver and a small pry tool. Disconnect the central cover.

Unscrew the two screws in front of you and remove the light unit. At this point, replace the bulbs with new LED units.

Once done, check their proper functioning, and then you can refit the light unit. Operation complete.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Light Bulbs on a Volkswagen Passat B6
How to Replace the Interior Light Bulbs on a Volkswagen Passat B6
Volkswagen Passat (2005-2010 / B6, 3C) Let’s go through the main steps to remove the interior light unit to replace the bulbs on a Volkswagen Passat B6. First, get inside the car and use a…
How to Remove the Roof Lining of a Volkswagen Passat
How to Remove the Roof Lining of a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Below are the main instructions on how to remove and replace the roof lining of a Volkswagen Passat. First, get inside the cabin and start removing a…
How to Replace the Interior Light Bulbs in a Volkswagen Passat
How to Replace the Interior Light Bulbs in a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Let's briefly go over the steps to remove and replace the bulbs of the interior light in a Volkswagen Passat, following the instructions below. First…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos