Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Side Airbag Sensor of the Volkswagen Golf 7

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Airbag

See other generations:
Video tutorial

To replace the rear side airbag sensor, start by sliding the rear seat forward, then use a 10mm socket to unscrew the nut holding the door trim and remove it from the clips; now disconnect the airbag connector by first lifting the red tab and then pulling out the connector.

Next, use a Torx key to unscrew the sensor's screw.

Take the new sensor out of the packaging, place it in the same position and orientation as the old sensor, screw in the screw with the Torx key, reconnect the plug, lower the red tab, and reattach the door trim, ensuring the seatbelt and seal are correctly positioned.

Finally, screw the nut back on with a 10mm socket and reinstall the rear seat.

You can also reset the error by connecting a device to the car's OBD port and clearing the error from the ECU.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Replace the Airbag Sensor in the Volkswagen Golf 5
How to Replace the Airbag Sensor in the Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In today's video, see how to replace the airbag sensor in the Volkswagen Golf 5. First, open the rear door on the left side. Lift the rear seat, unsc…
How to Reset the Airbag Light on the Volkswagen Golf?
How to Reset the Airbag Light on the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To reset the airbag light on the Volkswagen Polo, connect a diagnostic tool to the car's OBD port. First, you must disconnect the airbags by unpluggi…
How do you deactivate the passenger airbag of the Volkswagen Golf?
How do you deactivate the passenger airbag of the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) It will be possible to deactivate the airbag of the Volkswagen Golf by opening the glove compartment located on the passenger side: once the compartm…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos