Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Airbag Sensor in the Volkswagen Golf 5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Airbag

In today's video, see how to replace the airbag sensor in the Volkswagen Golf 5. First, open the rear door on the left side. Lift the rear seat, unscrew the fastener, and remove the side plastic cover. At this point, unscrew the two fixing screws and disconnect the airbag sensor (which is bright green). Replace it if necessary and work backwards to restore the interior of the vehicle to normal. Check now if the error has disappeared from the instrument cluster, and then the operation can be considered complete.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel Airbag from a Volkswagen Golf
How to Remove the Steering Wheel Airbag from a Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Before you can start, sit in the driver's seat of your Volkswagen Golf. Begin by releasing the clips that secure the airbag, located on the back of t…
How do you replace the steering angle sensor of the Volkswagen Golf?
How do you replace the steering angle sensor of the Volkswagen Golf?
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To replace the steering angle sensor on the Volkswagen Golf, it is necessary to unscrew the screws that secure the airbag located in the center of th…
How to Replace the Steering Angle Sensor on a Volkswagen Golf?
How to Replace the Steering Angle Sensor on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To replace the steering angle sensor on a Volkswagen Golf, you need to loosen the screws securing the airbag located at the centre of the steering wh…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos