Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

To reset the airbag light on the Volkswagen Polo, connect a diagnostic tool to the car's OBD port. First, you must disconnect the airbags by unplugging the relevant connector, which is located under the carpet in front of the driver's seat.

Once the sensor is disconnected, proceed to reset the light using the diagnostic tool, and only after the procedure is complete should you reconnect it. At this point, you can detach the scanner and verify that the light has been reset.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you can see how to reset the airbag light on the Golf 5 by following simple steps that will guide you to proper vehicle manag…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this guide, we will see the instructions that will allow us to deactivate the airbag malfunction light of the Volkswagen Golf; before performing t…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, learn how to reset the airbag light, whether for the steering wheel or passenger airbag, on the Volkswagen Golf, as well as o…

    Frequently Asked Questions

    • Golf 2012-2019 - What does the Volkswagen Golf error code P171900 indicate? Read answer
    • Golf 2008-2012 - What does the p171900 fault code indicate, in the Volkswagen Golf? Read answer
    • Golf 2019-2026 - How to reset the Volkswagen Golf Infotainment system? Read answer
    • Golf 2008-2012 - What does the fault code 00883 mean in the Volkswagen Golf? Read answer
    • Golf 2012-2019 - What does the Volkswagen Golf error P171900 mean? Read answer
    • Golf 2019-2026 - How to reset the Infotainment system in the Volkswagen Golf 8? Read answer
    • Golf 1997-2003 - What does the DSG error message on the Volkswagen Golf Mk4 mean? Read answer
    • Golf 2012-2019 - What to do when the brake pad warning light comes on on my Golf 7? Read answer

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos