Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Apply a Completely Black VW Logo on a Volkswagen Gol

Model: Volkswagen Gol 5U, G5 - Years 2008-2023
Part: Body

If you want to put a glossy/matte all-black logo on your Volkswagen Gol, (style comes at a cost, it’s almost $56.00 on major e-commerce platforms) you can do it as follows: there are three layers to apply with some care. First, clean the surface you intend to cover well, then position the glossy base trying to center it perfectly and avoid air bubbles, adhering it from the center to the outer perimeter. Remove the protective paper. Once it has adhered well to the edges, you can attach the outer edge. Pay attention to the mark indicating the halfway point, from which to start the application. Again, remove the protective paper. Now you can apply the matte VW logo. Center it as best as possible, ensure it adheres perfectly, and remove the protective paper. Perfect result.

Updated on 10 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where Are the Fuses Located in the Volkswagen Gol?
Volkswagen Gol (1994-2015 / G2, G4, G3) Inside the Volkswagen Gol, all fuses are contained within the single fuse box installed in the vehicle: in this car model, you will find only one fus…
How to Reset the Service Light in the Volkswagen Gol?
How to Reset the Service Light in the Volkswagen Gol?
Volkswagen Gol (2008-2023 / 5U, G5) Resetting the service light in the Volkswagen Gol does not require special tools or advanced mechanical skills. The reset involves just two steps. Th…
Where Are the Fuses Located on the Volkswagen Gol?
Where Are the Fuses Located on the Volkswagen Gol?
Volkswagen Gol (1994-2015 / G2, G4, G3) On the Volkswagen Gol, all the fuses are contained within the single fuse box installed in the vehicle: in this car model, you can find it inside the…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos