Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the gear knob gaiter on the Volkswagen Golf VI

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Shift knob

See other generations:
Video tutorial

If you need to change the manual gear knob on a Volkswagen Golf due to wear or to fit a more aesthetically pleasing one, you will need a flathead screwdriver and a plastic trim tool. Using the trim tool, carefully pry off the base of the soft gaiter at the base of the lever, taking care not to leave marks on the tunnel.

Once detached, pull it up to cover the knob, revealing a metal clip that you will loosen with the help of the metal screwdriver. Now, firmly grip the knob and, pulling decisively upwards, remove it while gently rotating it on the lever's axis.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob and Gaiter on a Volkswagen Golf
How to Replace the Gear Knob and Gaiter on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Before starting, sit in the driver's seat of your Volkswagen Golf. Begin by unhooking the lower base of the gear lever gaiter, then lift it to reveal…
How to Remove the Gear Shift Gaiter on a Volkswagen Golf
How to Remove the Gear Shift Gaiter on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To remove the gear shift gaiter on a Volkswagen Golf, sit inside the car and look towards the centre console where the gear lever is located. Careful…
Removing the Gear Knob and Gaiter of the Volkswagen Golf DSG
Removing the Gear Knob and Gaiter of the Volkswagen Golf DSG
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this tutorial, learn how to remove and replace the gear knob and gaiter of the Volkswagen Golf. First, get inside the vehicle and start by removin…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos