Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Clock

See other generations:
Video tutorial

Below are the main steps that will allow you to set the time on the instrument panel of the Volkswagen Polo. First, get in the car and start by turning on the instrument panel; then press and hold the button found on the instrument panel for a few seconds until the time starts to flash, as shown in the video.

At this point, rotate the button left or right to adjust the hour first and then the minutes; then exit the settings menu to save all the changes made!


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to set the time in the Volkswagen Polo?
How to set the time in the Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) In this tutorial, you will learn how to set the time in the Volkswagen Polo, a very simple and quick operation to perform, for example, after replaci…
How to Set the Time in a Volkswagen Polo?
How to Set the Time in a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this tutorial, see how to set the time in a Volkswagen Polo, a very simple and quick operation to perform after disconnecting the battery or after…
How to Set the Time on the Volkswagen Polo
How to Set the Time on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To set the time on the Volkswagen Polo, first turn on the instrument cluster. Next, check the display in the centre of the cluster, where the time is…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos