Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Clock

See other generations:
Video tutorial

To set the time on the Volkswagen Polo, first turn on the instrument cluster. Next, check the display in the centre of the cluster, where the time is shown, to ensure that the hours and minutes are clearly visible.

You will then need to use the two buttons located at the centre below the instrument cluster to select and set the correct time. The left button is for selecting the hour and minute data, while the right button is for setting both the hour and the minutes.

As shown in the video, press and hold the left button for one or two seconds until the hour data, followed by the minute data, begins to flash.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to Set the Time in a Volkswagen Polo?
How to Set the Time in a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this tutorial, see how to set the time in a Volkswagen Polo MK4, a very simple and quick operation to perform after the switch to daylight saving …
How to set the clock on the Volkswagen Polo
How to set the clock on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Today's information will allow us to set the time on the display of the Volkswagen Polo instrument panel. First, we get on board the car and start up…
How to Set the Clock on the Volkswagen Polo
How to Set the Clock on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To set the clock on the Volkswagen Polo, start by turning on the instrument cluster and the engine. Press the button with the tab symbol to make the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos