Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Repairing the Rear Bonnet Lock

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Body

See other generations:
Video tutorial

If the rear bonnet lock tends to jam, it is advisable to remove it and check if any internal components are out of place. To remove the lock, first open the bonnet and shift the plastic cover just enough to access the securing pins without completely removing it. Then, remove the caps at the bottom of the handles to access the screws underneath and undo them to move the cover panel and remove the securing pins of the lock, disconnecting the relevant connector to complete the removal.

Next, take off the metal cover of the lock to access its interior and reposition the components in their respective places, attaching the spring, inserting the guide bushes and pins, and then placing the motor and actuator cam.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacing the Boot Lock on the Volkswagen Golf
Replacing the Boot Lock on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Below are step-by-step instructions on how to remove and replace the boot lock on the Volkswagen Golf. First, open the boot and begin by removing the…
Emergency Opening of the Boot
Emergency Opening of the Boot
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) If the boot lock is damaged and cannot be opened using the external handle, access the boot by folding down the rear seat backrest and locating the m…
How to Replace the Tailgate Lock on a Volkswagen Golf?
How to Replace the Tailgate Lock on a Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the tailgate lock on a Volkswagen Golf, open the tailgate to access the screws securing the internal plastic trim. Once these screws are l…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos