Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light in a Volkswagen Golf?

Model: Volkswagen Golf MK 8, Golf 8, Golf Viii - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

As seen in this tutorial, resetting the tyre warning light in a Volkswagen Golf is an extremely simple and quick operation. Before doing this, ensure you have restored the correct pressure in each tyre according to the instructions in the manual.

Start by turning on the ignition, then go to the main menu and select the "Vehicle" option. Scroll horizontally through the various screens until you reach the tyre section and perform the reset using the "SET" option at the bottom.

Restart the vehicle and check that the reset was successful.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on the Volkswagen Golf?
How to Reset the Tyre Pressure Light on the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To reset the tyre pressure light on the Volkswagen Golf, inflate the tyres to the recommended pressure: this value is written on the sticker attached…
How to reset the tyre pressure light on the Volkswagen Golf?
How to reset the tyre pressure light on the Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To reset the tyre pressure light on the Volkswagen Golf, inflate the tyres to the recommended pressure: once the tyres are inflated, enter the cabin …
Reset of the tire pressure warning light for the Volkswagen Golf.
Reset of the tire pressure warning light for the Volkswagen Golf.
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's instructions will allow us to reset the tire pressure warning light on the Volkswagen Golf. Before performing the reset of the TPMS sensors, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos