Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on the Volkswagen Touareg?

Model: Volkswagen Touareg MK 1, 7L - Years 2002-2010
Part: Door trim panel

In this tutorial, see how to remove the rear door panel on the Volkswagen Touareg, a very simple and quick operation. First, open the door in question, then locate the two screws on the lower edge of the panel and undo them using a T25 Torx bit. Next, unclip the front cover of the handle, remove the screws just freed using a T30 bit, grasp the panel from the bottom, and separate it from the door. At this point, disconnect both the lock cable and the window regulator connector, and fit the replacement if necessary.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel of the Volkswagen Touareg
Removing the Door Panel of the Volkswagen Touareg
Volkswagen Touareg (2018-2026 / MK 3, CR) In today's video, you will see the steps that will allow you to remove and replace the door panel, both front and rear, of the Volkswagen Touareg. Fi…
How to Remove the Door Panel of a Volkswagen Touareg
How to Remove the Door Panel of a Volkswagen Touareg
Volkswagen Touareg (2002-2010 / MK 1, 7L) Before starting, open the door of your Volkswagen Touareg. Begin by prising out and removing the insert of the door handle panel using a thin but stu…
How to open the locked tailgate of the Volkswagen Touareg?
Volkswagen Touareg (2002-2010 / MK 1, 7L) In the Volkswagen Touareg, it can happen that the tailgate gets stuck, for example due to a problem with the unlock button or the lock actuator. In t…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos