Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Volkswagen Touareg?

Model: Volkswagen Touareg MK 2, 7P - Years 2010-2018
Part: Door trim panel

This tutorial shows how to remove the driver's door panel on a Volkswagen Touareg, a very simple and quick operation. Start by opening the door in question, then remove the front part of the armrest handle and the window switch console. Next, using a Torx T25 key, unscrew all the released screws and begin to unclip the panel from the bottom until it is completely removed. Once done, disconnect the rear connector, the lock control cable, and install the replacement by following the reverse procedure.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Volkswagen Touareg
How to Remove the Door Panel of a Volkswagen Touareg
Volkswagen Touareg (2002-2010 / MK 1, 7L) Before starting, open the door of your Volkswagen Touareg. Begin by prising out and removing the insert of the door handle panel using a thin but stu…
Removing the Door Panel of the Volkswagen Touareg
Removing the Door Panel of the Volkswagen Touareg
Volkswagen Touareg (2018-2026 / MK 3, CR) In today's video, you will see the steps that will allow you to remove and replace the door panel, both front and rear, of the Volkswagen Touareg. Fi…
Disassembly of the front door panel of the Volkswagen Touareg
Disassembly of the front door panel of the Volkswagen Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) Today we will see the main information on how to disassemble and replace the front door panel of the Volkswagen Touareg. First of all, we open the fr…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos