Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the dipped beam light of the Polo 5.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Headlight bulb
Operation: How to replace the dipped beam light of the Polo 5.

In this video tutorial, it is shown how to replace the low beam bulb of the Volkswagen Polo 5. To replace the bulb, first, you need to open the hood and then secure it. After securing the hood, you need to remove the two screws on the headlight, and once the screws are removed, pull the headlight outward. Once the headlight is extracted, you need to remove the two metal clips at the back to access the bulb. Now, you can replace the bulb. After replacing the bulb, close the clips, put the headlight back in place, and then screw in the two previously unscrewed fixing screws.


Posted on 17 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the parking light bulb in the Volkswagen Polo 9n? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos