Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. New Beetle
  6. : How to replace the headlights bulbs of the Volkswagen New Beetle.

Volkswagen New Beetle - Video tutorial

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Headlight bulb
Operation: How to replace the headlights bulbs of the Volkswagen New Beetle.

Briefly, we will discover the instructions that will allow us to disassemble and replace the headlight bulb of the Volkswagen New Beetle. First, we open the car's engine hood and start lowering the metal lever that we find behind the headlight, releasing and removing it. Then, we disconnect the electrical connector of the bulb to remove it from inside the headlight, as shown in the video. At this point, we install the new low beam bulb, of the right type and with the same attachment; we securely attach it to the headlight and reassemble everything!


Posted on 27 August 2023 by ScegliAuto



How to remove the headlights of the Volkswagen New Beetle.
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Let's see the steps for disassembling and replacing the front headlights of the Volkswagen New Beetle, following the instructions below. First, we op
How to replace the front headlights in the Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / MK 2, 9C) In this tutorial, we can see how to replace the front headlights in the Volkswagen New Beetle, an extremely simple and quick operation. First of all,
How to remove the headlight on the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) In today's video tutorial we will see the steps that will allow us to remove the headlight and replace the bulb on the Volkswagen New Beetle. First w

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos