Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to customise the rear lights on a Volkswagen Golf VII

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

If you find that the white strip on the rear lights of your Volkswagen Golf stands out a bit, you can make it less visible aesthetically (but you won't lose brightness when reversing) with stickers that can be found on badgeskins.com, where there are many accessories and stickers to personalise your car as you like.

Now, back to our rear lights: first, clean and degrease them thoroughly.

Then, following the video, place the various pieces on the white strip, pressing firmly as the strip adheres to the light. Next, remove the upper masking.

Now, move to the other half of the light, following the same method. Position the last small triangle, then move on to the other light.

Simple and quick.


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to remove the rear lights on a Volkswagen Golf?
How to remove the rear lights on a Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this tutorial, we will see how to disassemble the rear lights on a Volkswagen Golf, a very simple and quick operation. First of all, let's make su…
How to Replace the Rear Lights on a Volkswagen Golf
How to Replace the Rear Lights on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide, you will find instructions for removing and replacing the rear lights on a Volkswagen Golf. First, open the tailgate and start by remo…
How to replace the rear headlight bulbs in the Volkswagen Golf?
How to replace the rear headlight bulbs in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this tutorial we can see how to replace the rear headlight bulbs in the Volkswagen Golf, an extremely simple and quick operation. First of all, ma…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos