Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear lights on a Volkswagen Golf?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

In this tutorial, we will see how to disassemble the rear lights on a Volkswagen Golf, a very simple and quick operation. First of all, let's make sure that the key is not inserted, so we can work safely.

Then, we open the trunk and move the carpet located at the back of the light in question. Next, we unscrew the indicated white plastic bolt, separate the light from the body by pulling it outward, and disconnect the power connector.

At this point, all that is left to do is connect the replacement part and reassemble everything by following the reverse procedure.


Posted on 9 December 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Lights on a Volkswagen Golf?
How to Remove the Rear Lights on a Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Removing the rear lights on a Volkswagen Golf, as shown in this tutorial, is a very simple task. Before proceeding, ensure that the key is not in the…
How to Replace the Rear Lights on a Volkswagen Golf
How to Replace the Rear Lights on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide, you will find instructions for removing and replacing the rear lights on a Volkswagen Golf. First, open the tailgate and start by remo…
How to Remove the Rear Lights on a Volkswagen Golf
How to Remove the Rear Lights on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To remove the rear lights on a Volkswagen Golf 7, open the tailgate and locate the side internal trim of the boot, corresponding to the light you wis…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos